Quickstart Guides
Choose the quickstart guide for your platform to get up and running with FujiNet as quickly as possible.
Each guide covers the essentials: hardware overview, connecting the device, first boot, WiFi configuration, and basic usage.
Available Platforms
| Platform | Interface | Status |
|---|---|---|
| Atari 8-bit | SIO Bus | Stable / Complete |
| Apple II & III | SmartPort / Disk II | Stable / Complete |
| Coleco ADAM | AdamNet | Stable / Complete |
| Commodore 64 | IEC Bus | Beta / In Development |
| PC MS-DOS (RS232) | Serial RS-232 | Beta / In Development |
| Virtual FujiNet | Emulator (no hardware needed) | Stable |
Tip: If you don’t have any retro hardware, you can try FujiNet right now using the Virtual FujiNet guide with just your modern computer!
Common First Steps
Regardless of your platform, you’ll generally follow these steps:
flowchart LR
A[Connect FujiNet\nto your computer] --> B[Power on\nand boot]
B --> C[Configure\nWiFi]
C --> D[Browse hosts\nand mount disks]
D --> E[Boot your\nfavorite software!]
Important: FujiNet uses the ESP32 chipset, which operates on 2.4 GHz WiFi only. If you have a dual-band (2.4/5 GHz) router with a shared SSID, you may experience connectivity issues. Consider setting up a dedicated 2.4 GHz SSID if problems arise.
Need Help?
- Join the FujiNet Discord community for real-time support
- Visit fujinet.online for the latest news and downloads
- Check the User FAQ for common questions